Below are the certificates provided to us by the manufacturers. They testify that:
products are covered
by the manufacturer's
warranty service is
performed only by
certified service stations
any spare parts
set by the
In addition, each certificate is a confirmation of the trust shown by the Strans manufacturing companies. We are proud and responsible of such an appreciation of our work and do our best to justify our work.
NOXy is the most famous Polish brand under which Adblue fluid is manufactured. This substance converts harmful NOx in the exhaust gases of a diesel-powered vehicle into nitrogen and vapors that are safe for life. All this leads to the reduction of nitrogen oxides, which is the main source of atmospheric pollution. NOXy-branded Adblue is released by Azoty Group. The highest quality substance is used for production. All production facilities are located within the EU. It is the largest Adblue manufacturer in Poland and one of the largest in Europe. Thanks to this, Azoty Group guarantees uninterrupted deliveries. A lot of attention is paid to the storage and transportation conditions of Adblue NOXy. A large number of additional measures are aimed at protecting the product from dirt and ensuring its high quality. This is confirmed by the quality certificate ISO 22241. SCR technology (based on catalytic reduction) is used for its use. It should also be noted that this system is effectively used not only in trucks but also in cars
Euroricambi is an Italian company that produces spare parts for trucks and buses. The company is located in 90 countries around the world and has a manufacturing plant that operates in 7 factories. Euroricambi manufactures components for transmissions and differentials. They are ideally interchangeable with the original parts of major manufacturers, such as: Mercedes-Benz, ZF Transmissions, Volvo, Scania, DAF, MAN, Renault Trucks, Iveco, Dana (Eaton Axles), Fuller Transmissions, MERITOR (ROCKWELL), Caterpillar and etc. Euroricambi enhances its service every day, constantly developing new products, offering an alternative to original spare parts for all new mechanical transmissions that are available on the market.
SAF-HOLLAND S.A. with headquarter in Luxembourg is the largest independent commercial vehicle supplier in Europe and is present in most of the world markets. The merger of two regional leaders: SAF in Europe and HOLLAND in the US in December 2006 was a joint step into international markets. The company is one of the leading manufacturers and suppliers of axles and suspension systems, primarily for trailers and semi-trailers, as well as for trucks and buses. SAF-HOLLAND is currently active in 28 countries and on six continents. The product range also includes pins and chassis, five wheels for tractors, air suspensions, clutch products and numerous other components for buses and trucks. The products are sold under the brands SAF, HOLLAND and NEWAY. SAF-HOLLAND sells its products to Original Equipment Manufacturers (OEMs) on six continents and works closely with car parks operators and transportation companies.
The company was established in 1958 and is still managed as a family business in the third generation. Hengst offers a range of filters that will convince even the most demanding customers. The company guarantees high reliability from safe installation to optimum work and long service life. Hengst's global network of offices is opening up new worlds in the market and it is a big step towards meeting clients in the full sense of the word. The firm's offices are located on four continents in 9 countries. For many car manufacturers, wholesalers and the aftermarket, as well as a growing number of industrial customers, Hengst has become synonymous with filtration and water supply management.To maintain this reputation, the company works every day to develop its competence in filtering. It is necessary to master many sciences to take a place on the market as a manufacturer of original spare parts for vehicles and the automotive industry. And this is exactly what Hengst is capable of and has been focusing on for over 55 years. Hengst's certified quality control and quality assurance system is ISO 9001 and ISO compliant.
Knorr-Bremse GmbH was founded in 1905 in Berlin. Knorr-Bremse is a leading global supplier of truck braking and driving systems, a supplier of components for major truck manufacturers worldwide. In addition to complex of brake system solutions, the range of products covers driver assistance systems throughout the transmission as well as their service and after-sales service. The KNORR-BREMSE concern includes such brands as KONSBERG, BENDIX, BOSCH (pneumatic direction), WIRA. KNORR-BREMSE's production program includes units and assemblies, various repair kits for ABS, ASR, EBS, ECAS, ESP, ELC systems. KNORR-BREMSE also manufactures and sales diagnostic and control systems and diagnostic equipment.
Aignerr was founded in 1991. The main activity of the company is the production of premium airbags. Their products meet all quality requirements and criteria, and they are validated by strength tests. Pneumatic springs show the highest level in difficult road and weather conditions. Aignerr complies with ISO +9001 quality. Aignerr is a recognized development partner and manufacturer of original commercial transport equipment with a pneumatic suspension system for buses, trucks, trailers and semi-trailers. The air suspension is fitted to all types of trucks with great success. Aignerr pneumatic springs are designed for a wide range of applications on the front and rear axles, as well as on the driving axles of the semi-trailer.
Tissen brake equipment is not just a product, it is an ideology that underlies uncompromising thinking, responsibility and trust. Since its inception, Tissen has adhered to its own principles: reliability, high quality and openness to innovation. The company strives to introduce innovative products that are ahead of the competition and meet customer requirements. Today, Tissen offers a wide range of brake pads, brake discs, brake linings and brake drums for commercial and specialized vehicles. As a result of serious testing, both at the production site and in independent organizations, the company is confident in the quality of its products. Tissen's friction brake material ensures maximum efficiency, comfort and safety. Ideal for almost every truck in Europe. Brake discs and gaskets were first presented at the Birmingham exhibition in 2006 as a solution to the problem of braking in difficult conditions and have been kindly considered by experts. The Tissen brake discs provide maximum braking performance, excellent vehicle control and exceptional driver and passenger comfort.
In 1869, George Vestinhauz founded the WABCO Company, which had flourished throughout the twentieth century. The company went beyond rail technology due to its groundbreaking breakthroughs in the commercial vehicle industry in Europe and North America. Today, WABCO manufactures one of the world's best braking, transmission, hydraulic systems, cruise control and more. The company remains a leading global provider of technology and management systems to ensure the safety and efficiency of commercial vehicles. WABCO continues to be a pioneer in the discovery of mechanical, electronic-mechanical and electronic technologies for the braking, stability and automation systems of transmissions that are delivered to the world's leading manufacturers of commercial trucks, buses and trailers. With 13,000 employees in 40 countries, WABCO develops a unique culture of innovation and diversity to meet the needs of clients around the world, using local talent and knowledge in a global collaborative environment.
Banner is Europe's leading battery supplier and is ranked in the top three of the automotive battery industry. The company is the only one to receive international recognition from an Austrian battery manufacturer that supplies its products to many well-known automotive factories, such as Audi, Mercedes, Volkswagen, BMW or MAN. Innovative thinking makes it possible to produce high quality products, as evidenced by their safe operation and long service life. Banner is certified to ISO 9001, ISO / TS 16949 and ISO 14001 quality standards.
TEXTAR is one of the largest manufacturers of automotive brake pads. Supply of products for original equipment - OE has led the car industry to leading positions in the industry. All goods under the TEXTAR brand are manufactured in accordance with the OE specification for both conveyor and auto parts delivery. For almost a hundred years of existence, the company has accumulated experience and developed technologies that allow it to produce the latest brake pads that meet all the requirements of today and even exceed the standards. The range of products that are manufactured by the company covers the requirements of the European market almost completely. TEXTAR products are manufactured for all leading car companies.
The Turkish company SAMPA Automotive Inc was founded in 1994. It supplies spare parts for many heavy trucks, trailers and semi-trailers. The company's headquarters are located in Samsun (Turkey). SAMPA has offices in many countries (UAE, Germany, Russia, Kazakhstan, Nigeria, South Africa, USA). As of the end of 2014, Sampa was exporting spare parts to 116 countries. SAMPA continues to increase its share of the auto parts market every year. The product range includes more than 30 000 units. The company is a recognized specialist in its field. The company also has its own 3000 m2 research and testing center with an annual investment of $ 10 million. The company has many patents. SAMPA has all the necessary quality certificates. It has been following the requirements of ISO / TS 16949, ISO / EN 17025, ISO 14001, ISO 18001 for many years.
The Dutch company NRF has been operating since 1927 and during this time became one of the leading manufacturers of radiators, heat exchange elements (grilles, plates, tubes) of radiators, coolers, oil coolers, box coolers (cooling chambers) and air conditioning units. NRF goes further than just manufacturing. NRF designs and manufactures state-of-the-art heat transfer systems. NRF products are used in many industries around the world. Leading car manufacturers, industrial companies and, of course, the aftermarket are regular customers of NRF. NRF means opting for quality and service. NRF has an extensive network of manufacturing sites and distribution centers that are strategically located throughout Europe.
SKF is one of the world's largest manufacturers of bearings as well as bearing steel. Today, the company has more than 80 plants operating in 70 countries - Germany, Great Britain, France, Italy, Spain, Sweden, Netherlands, Poland, Japan, USA, Brazil, Mexico, China, Korea, India, Malaysia, Indonesia, Southern Africa, Ukraine and others. Most of the world's leading car manufacturers have already chosen SKF as their partner. Today, SKF produces around 600 million bearings a year. SKF's range covers 96% of the bearing market. SKF produces for the truck market: hub assemblies; bearings/crosspieces of cardan shafts; repair kits of gearboxes bearings/differential of a back axle; rollers of automatic tension of belts of drive of units; wheel bearings; axle and wheel hub seals; plastic lubricants.
DAYCO is the world leader in the design and production of power transmission systems for engines of cars, trucks and motor vehicles. The company supplies its products to Conveyors of leading automakers (OE / OES), as well as to the aftermarket. DAYCO was founded in 1905 and has a history of over 100 years, during which Dayco has consistently remained a manufacturer and developer of the highest quality products. DAYCO is the developer of advanced technical solutions for the world's leading automakers. The company is constantly investing in materials research and development of technical innovations and it is ahead of tomorrow's needs of automotive engine manufacturers. DAYCO's partners include brands such as VAG, Mercedes Benz, BMW, PSA, Ford and many other market leaders. The company's plants are located in Europe, North America, South America and Asia. DAYCO supplies a complete, constantly updated range of gear system components to the independent market, as well as providing the necessary customer service and support to enhance professional skills. The quality of Dayco products is original and equivalent to the original, certified by the certificates of international standards ISO 9002.
The Dinex Group is a global manufacturer and distributor of innovative exhaust systems and emission control systems as well as solutions for powerful diesel engines and the automotive industry. Today, the Dinex Group of Companies with headquarter in Denmark, manages 15 companies and has operations in Denmark, Germany, Latvia, Turkey, Russia and China. Constantly growing lineup covering more than 15,000 names of spare parts and ready-made systems, as well as all the necessary devices for exhaust control systems: pipes, mufflers, clamps, flexible pipes, isolation and devices for further treatment such as SCR and DPF. Dinex is the only manufacturer of devices for the control and treatment of exhaust gases and emissions, which has its own technologies and production platforms for the manufacture of catalyst substrate and coating of finished products.
Elring offers a wide and market-oriented range of gaskets, sealing kits of automobile gaskets and service parts, as well as a large selection of sealants. All original Elring products in their quality correspond to the original configuration of the car - manufactured by ElringKlinger AG. The company develops and manufactures components for engines, gearboxes and exhaust lines, as well as for alternative drive systems for practically all car and engine manufacturers. Innovative potential and competence in the field of primary equipment components is the key to the company's high reputation and successful performance in the global auto parts market. For many years, the brand of "Elring - Das Original" has been a guarantee of superior quality, safety, service, speed of delivery and reliability.
Since its founding in 1952, the JOST Group has reached the leading position in the world in the production of truck systems, modules and components. The traditions of its success are based on flexibility, technical ability, entrepreneurship and close involvement of the company's employees in its activities. JOST offers the world's largest range of truck products. And as a system vendor, it sets the scope for future development.
BPW is a leading manufacturer of intelligent undercarriage systems for trailers and semi-trailers. Due to its strength in innovation, the company has been able to achieve continuous growth, and is now regarded worldwide as a reliable partner and supplier of the highest quality products.The company was awarded «the Brand of the Year» title in «the Axis for Trailers» category for the eighth time in 2014. BPW has a global network of 50 own companies and more than 3,200 service partners. The company has 10 production sites that can be found in Germany, Russia, Hungary, China, Australia and South Africa. They all operate according to high standards of production and assembly.
The company was founded in 1931 in Grossskötz under Günzburg (Germany) by Alois Kober. At first it was a small forge. It became the basis of future production. In 1952, it began to produce levers for hand brakes. Already in 1961, AL-KO opened its first branch in Zell (Austria). The production of lawn mowers and chainsaws was started in the 1960's and 1970's. It is AL-KO who created the first robotic lawnmower. At the same time, the production and manufacturing of components for cars is expanding. Today, the company's range includes components for trailers, construction equipment, chassis, various types of shock absorbers, plastic products. Most of the products are intended for residential vans and trailers. Due to the support of high standards of production, quality and reliability of finished products, AL-KO has a number of certificates from different European countries (Germany, Austria, Italy, United Kingdom, etc.), including ISO 9001 and ISO / TS 16949 certificates.
MERITOR - це європейська торгова марка компанії Arvin Meritor, штаб-квартира якої знаходиться в місті Троя, штат Мічиган, США. Сьогодні лінія MERITOR об'єднує виробництво осей, елементів підвіски, необхідних комплектуючих, амортизаторів та гальмівних систем. Запчастини MERITOR виготовляються не тільки для виробників причіпної техніки, а й активно пропонуються для продажу на вторинному ринку запасних частин. Компанія є одним з провідних виробників осей для причіпної техніки та має близько 120 заводів в 25 країнах світу (Швеція, Італія, Франція, Великобританія та ін.). В даний час компанія ArvinMeritor представлена двома підрозділами - CVS (поставляє на ОЕМ), CVA (поставляє на Arftermarket). Крім налагодженого виробництва запасних частин для вантажівок, ArvinMeritor також займається відновленням деталей. Продукцію Meritor відрізняє гарантована безпека і простота в обслуговуванні. Численні нагороди від провідних виробників автомобілів, таких як NISSAN, TOYOTA, MACK і VOLVO є доказом унікальності цієї продукції.
HELLA is a global company with a rich history spanning over 100 years. The company develops and manufactures lighting technology and electronic products for the automotive industry and owns one of the largest auto parts and accessories retailers in Europe. HELLA is one of the top 40 automotive suppliers in the world and is one of the 100 largest German industrial companies. The company is present in most markets in Europe, Asia, North and South America, and has offices in 39 countries worldwide and 118 locations. Excellent quality is the highest priority and benchmark for everything HELLA does.
Timken Company is the world's largest manufacturer of tapered roller bearings and special grades of steel located in the United States. The products and services produced by the company are used in transport, industrial equipment, electronics, mining and drilling equipment, aerospace and military equipment. Today, the company has 25,000 employees and has offices in 27 countries. In 1898, Henry Timken received a patent for inventing the world's first tapered roller bearing. Subsequently, in 1899, Timken founded a company in St. Louis (USA) and was named The Timken Roller Bearing Axle Company. At the time, Henry Timken was working on the production of carriage crews in St. Louis, and already had three patents for the invention of the crews. However, it was the invention of the roller bearing that allowed his company to become truly successful. In the late 19th century, the invention of the tapered roller bearing was a real breakthrough in the manufacture of wheel axles, which has not undergone significant changes in previous centuries. In 1901, the production capacity of the company was relocated to the city of Kenton, where the automotive industry was already gaining momentum, overtaking the production of coach cars. Winner of the first ever 500-mile Indianapolis race, Ray Harroun crossed the finish line on a car with Timken hub bearings installed on it. In 1916, the Timken Company mastered the production of steel and pipe blanks at a plant in the city of Kenton, which allows complete control over the process of casting steel and its application in bearings of its own production. By the end of the 1990s, about 80% of its production volume had been exported abroad, and revenue from this activity accounted for one-third of the company's total sales.
CORTECO (a company in the Freudenberg Group) is the world's leading manufacturer of seals and components for vibration and noise control, as well as cabin filters. Its product range, including more than 19,000 items, is one of the widest in the field of sealing and vibration technology. These include Simmerring® seals and micronAir® cabin filters, which equip every second new car in Europe. CORTECO has branches in 57 countries and manufacturing facilities worldwide. The company is known for its excellent service and efficient logistics system. This, as well as the quality of their products, is the basis of a prominent position on the market.
Fersa is a multinational Spanish company specializing in the design, development, production and distribution of high-quality bearing solutions. Fersa has more than 50 years of experience in this field. The company annually produces more than 200 models. Fersa manufactures bearings for transmission, differentials and hubs, which is a great alternative to the original equipment parts from such leading global manufacturers as Mercedes Benz, Volvo, Iveco, BPW and Freightliner, among others. Fersa has achieved high performance: long life and maximum reliability by combining precision in design and rigorous quality control, using technology at the manufacturing and control stages.
Universal Components is today an active export-growing company. It sells its products in more than thirty countries in Europe, Africa, the Middle East and Asia. The company's philosophy is customer control. They ensure that they do their best to meet and exceed customer needs. The company's commitment is to provide the original equipment with quality parts on time and maintaining a competitive market price. Universal Components is a reliable, leading supplier of truck and trailer parts. The company has a wide range of mud guards for trucks, exhaust fluids, license plate holders to trailer electricity.
The Italian company ANTONIO MASIERO became part of the Euroricambi group in September 2010 and is now called A.M. GEARS. The range of A.M. GEARS focuses on parts for gearboxes and differentials for automotive applications (light, medium and heavy) and applications for the production of agricultural machines that meet the same qualities and technological standards of the original manufacturers. The MASIERO range consists of parts such as crowns and original gears, shafts and synchronizers that are suitable for Isuzu, Hino, Nissan, Mitsubishi, Toyota, Deutz, R.V.I. (Renault), Fiat / Iveco, Volkswagen, Land Rover, Ford, Mercedes and many more. ANTONIO MASIERO is one of the most prestigious and popular manufacturers in the world.
ROCKINGER was founded by blacksmith Johan Rokinger in 1875. The company has instrumental role in shaping the technical development of coupling devices for trailers. In 1927, ROCKINGER developed and produced the HGV Safe Coupling, the first fully automatic trailer hitch. In the 1970s, the range of goods was extended by trailed couplings for use in agriculture and forestry. In the early 90's, ROCKINGER was acquired by Wechmar and in 2001 by JOST. The company's products have many certificates (ISO 9001: 2008, ISO TS 16949: 2009 ISO 14001: 2004, KBA Confirmation and others). The ROCKINGER product range for agriculture is extremely wide. High quality couplings, traction brackets and pivot rods meet the stringent requirements of the international agriculture and forestry sector.
Although the British company JOHN GUEST was founded only in 1961, the first prototype of the casting machine was developed by John Gest in the late 1950s. Initially, the company specialized in manufacturing precision machinery and tools. At the same time, zinc casting company was established. Since 1971, JOHN GUEST has been manufacturing sophisticated cast products for large manufacturers of pneumatic valves. In 1974, the first contact socket for use with compressed air was developed. This basic “Super Speedfit” concept has been designed for a wide range fittigs of applications. The same year a connector for compressed air was developed. In 1978 John Guest Limited was created. In the 1980s, production capacity was expanded and direct exports of its goods began. JOHN GUEST received 2 Queen's Award for Export Achievement (1990 and 1995). In 1990, the quality of the company's products was confirmed by the British Standard Kitemark Award.
ALFRED KÄRCHER GMBH & CO. LTD. KG is a German company, the world's largest manufacturer of cleaning equipment. The company was founded by Alfred Kercher in 1935 in Stuttgart, when Kercher manufactured a crucible furnace and an electric recessed heating element for industrial use. The first big success is the energy-saving salt furnace for light metal tempering. When the opportunities for further development were exhausted, Alfred Kercher sold his patents and purchased the production space in Winnenden, where the company's headquarters are still located. In the following years, KÄRCHER expanded its range of special heating appliances. At Lufthansa's request, the company develops heating devices for heating aircraft engines and removing icing from the wings. Alfred Kercher's next major invention was also related to aeronautics: on-board heating devices allowed aircraft to climb to higher altitudes. KÄRCHER launches the first European high pressure washer KW 350 on the market in 1950. This event marked the company's entry into the cleaning equipment market and determined its further direction. Since 1980, the company has been concentrating on transport and building cleaning. The product range includes techniques for solving cleaning problems in various fields: high-pressure cleaners, vacuum cleaners, sweepers, car washes, cleaning products, steel apparatus for dry-ice cleaning, apparatus for cleaning equipment and installations for water treatment. The next year that dramatically changed the company's history was 1984: KÄRCHER introduced the world's first HD 555 high-pressure portable household appliance and creates a whole new market. By the early 1990s, KÄRCHER was actively conquering the end-user market by offering a variety of home appliances. Today they include dry and wet cleaners, steam cleaners, polishers, windscreen wipers, as well as a fully automated robotic vacuum cleaner. They were joined by home and garden pumps with garden irrigation accessories, which were included in the production program in 2006.
The Italian company COS.PEL started its activity in 1990 for the production of body parts for commercial transport. Almost from the first years of its existence, it has gained the trust and respect of car manufacturers. The proof of this was that in 1993, the company's products began to be delivered to Renault Truck conveyors. In 1995, the manufacturer became an IVECO supplier. In the early 2000s, COS.PEL came to the fore in Italy. The company is constantly investing in its production. The company is expanding its production facilities, upgrading its equipment and robotizing it. The high quality of the products allowed COS.PEL to obtain the ISO 9001: 2008 certification. Currently, the product range is over 5000 items. These are components for trucks such as Renault Truck and IVECO, as well as DAF, SCANIA, VOLVO, MAN, MERCEDES-BENZ.COSPEL have received all the necessary certification (ISO 9001: 2008 - EAC and TS / 16949), which confirms the quality of the products.
The company was founded in Saarbrücken (Germany) in 1989 by Gerhard Robeller and was called Trucktec Fahrzeugteile GmbH. At the beginning of its operations, TRUCKTEC AUTOMOTIVE specialized in the assembly of spare parts for Mercedes-Benz trucks. In the 2000s, the company expanded to introduce a new quality management system in accordance with DIN EN ISO 9001: 2000. During these years it was renamed TRUCKTEC AUTOMOTIVE GmbH. Gradually, TRUCKTEC began expanding its markets in the Middle and Far East, opening its own branches in Dubai, Singapore, Shanghai, and the Company gradually expanded its range of products for BMW, MAN, Volvo and Scania. Thus, TRUCKTEC AUTOMOTIVE becomes one of the largest suppliers of spare parts for German machine brands. From the beginning, it did not focus on any specific product, so it can now offer a large number of spare parts for the engine, transmission, electricity, etc. In general, the company's product range is represented by more than 2000 product names.
The German company ATE was founded by Alfred Tevez in 1906. Focusing on the development of brake systems, ATE holds the first place in the production of the first hydraulic system that was installed on the car in 1926. At that time, it was actually an innovative invention. Today, ATE Continental Teves Inc. is the largest manufacturer of automotive safety systems in the world and is a part of Continental Automotive Systems. ATE develops in two directions: the development and production of electronic components (Continental Temic) and the production of electronic and hydraulic brake systems, undercarriage control systems, and various sensors. ATE is currently supplying products to every major automaker (VAG, Ford, GM, BMW, etc.). Its range consists of brake discs and drums, perforated brake discs, brake calipers, brake hoses and repair kits, work cylinders, etc.